Acroduster Computer Generated PicturesAll pictures Copyright 2002, Matthew C Meek. All rights reserved |
Below are some computer generated pictures of the Acroduster II (SA-750)
fuselage. I put these together to help visualize how the fuselage goes together
and I thought that they may be useful to others. Although these images
are intended to represent an Acroduster fuselage, please refer to your
plans for all details. There may be mistakes in these images and there
are a few caveats:
1. Some of the landing gear attach detail is missing. If I get time
I may add images of both the spring gear and bungee attachments.
2. The ends of the wing attach points are not rounded in these images.
I didn't think that I needed to add ALL of the details.
3. Some of the reinforce tubes and other details are missing. And there may be other mistakes. Check your plans.
4. DISCLAIMER:
While every effort was made to ensure that the information contained
here is accurate, this information, is provided "AS IS" without warranty
of any kind, either expressed or implied. These images are from my interpretation
of the plans and as such nothing here is guaranteed to be based in fact.
USE AT OUR OWN RISK!!
Potential Seat Modification:
Although it is not indicated on the plans, the two vertical tubes that
form the back of the front seat can be bent inwards some to allow for more
back seat leg clearance. This is an option that each builder will have
to evaluate for themselves. Here are a couple of images of this option.
